G COMM Home page
View Cart GME EPIRBs (Emergency Position Indicating Radio Beacons)  
 COMMUNICATION & NAVIGATION ~ SIMPLE & STRAIGHTFORWARDG Comm supplies Epirbs and PLBs from GME
Back to  G Comm  home page for all your marine electronic needs home contact us

about

privacy

sitemap

GME has combined over 20 years experience in designing and manufacturing EPIRBs to produce products that lead the industry in personal safety equipment.
 

EPIRB Product Range

bullit GME MT403
bullit GME MT403G
bullit GME MT403FF
bullit GME MT403FG
 

PLB Product Range

bullit GME MT410
bullit GME MT410G
   
 

All our EPIRBS are coded for UK use. If you need one programmed for foreign flag, we can supply.

Tel 01493 669966 for more information

or email gcomm

   

GME Personal Locator Beacon MT410G PLB - 406MHz

Qty
GME MT410G PLB with GPS
only £278.26 + vat =£326.96
(VAT @17.5%)

GME MT410G PLB

MT410G - Pocket 406MHz PLB with GPS (Non Hazmat batteries)

 

The MT410G is a Personal Locator Beacon features a built-in GPS receiver (Global Positioning System) with a 406 MHz transmitter and 121.5 MHz homing signal. In the event of an emergency, an alert signal is transmitted to COSPAS-SARSAT satellites and forwarded to a rescue coordination centre within typically 3 minutes. The built-in GPS receiver will provide latitude and longitude co-ordinates to give a position to within typically 30 metres anywhere in the world

 

  • The GME MT410G PLB is designed for use when the safety of life is endangered and you have no other means of communication. The PLB can save your life and the lives of others by leading an air, land or sea rescue to your precise location.
    PLBs are an excellent choice to provide added safety while participating in just about any outdoor or remote area activity. The MT410/410G beacons are fully sealed units and will not sink if dropped into water, making them equally suitable for use on board a boat, or in many other diverse water sport adventures.

  • 7 year battery life
  • 7 year warranty
  • Worldwide coverage typical accuracy <45 meters
  • 1st GPS fix in <60 seconds
  • Exclusive high visibility strobe
  • Small & lightweight
  • Unique instantaneous transmission
  • Transmits simultaneously on 406MHz & 121.5MHz
  • Waterproof to IP67 Standard
  • Tough construction, specifically designed to float
  • Includes rugged protective holster & lanyard
  • COSPAS-SARSAT worldwide operation.

Note: PLBs are not a satisfactory substitute for situations which require the specifically designed GME Marine EPIRBs. An EPIRB is designed to float unassisted with the antenna above the water surface to meet Maritime Authority requirements.

 

 

   

  Copyright 2010 G COMM

Tel +44 (0) 1493 669966

G COMM a Gardline Group Company

G Comm UK footer banner

website by zennet.co.uk

Must I register my EPIRB or PLB?
If you own a 406 MHz EPIRB or PLB then it must be registered with the appropriate authorities. Registration of your 406 MHz beacon is critical, without it your beacon is anonymous. In addition to the distress signals, 406 MHz beacons transmit a unique identity code. This ID can be cross-referenced with a database of registered 406 MHz beacon owners by Search and Rescue authorities. The database includes phone numbers, next of kin details, information on the type of vessel and how many people it usually carries. This will help in the right response to the emergency to be provided.

Emergency Position Indicating Radio Beacon (EPIRB). EPIRBS are for use in maritime applications. There are two types of EPIRB. One type transmits an analog signal on 121.5 MHz. The other type transmits a digital identification code on 406 MHz and a low-power "homing" signal on 121.5 MHz.  Satellite processing of 121.5MHz analogue signals will cease in January 2009, so buyers should only consider EPIRBs transmitting on 406MHz.  121.5MHz will continue to be used for final homing only

The 406 MHz EPIRBs are divided into two categories. Category I EPIRBs are activated either manually or automatically. The automatic activation is triggered when the EPIRB is released from its bracket. Category I EPIRBs are housed in a special bracket equipped with a hydrostatic release. This mechanism releases the EPIRB at a water depth of 3-10 feet. The bouyant EPIRB then floats to the surface and begins transmitting. If you own a Category I EPIRB, it's very important that you mount it outside your vessel's cabin where it will be able to "float free" of the sinking vessel. 

Category II EPIRBs are manual activation only units. If you own one of these, it should be stored in the most accessible location on board where it can be quickly accessed in an emergency.

If you have a 406 MHz EPIRB their signal can be instantly detected by geostationary satellites. This means that even a brief inadvertant signal can generate a false alert. To avoid getting a call from the Coast Guard make sure that when you test your EPIRB you follow the manufacturer's recommendations carefully.

Personal Locator Beacons (PLBs). PLBs are portable units that operate much the same as EPIRBs . These beacons are designed to be carried by an individual person instead of on a boat or aircraft. Unlike some EPIRBs, they can only be activated manually and operate exclusively on 406 MHz. And like EPIRBs and ELTs all PLBs also have a built-in, low-power homing beacon that transmits on 121.5 MHz. This allows rescue forces to home in on a beacon once the 406 MHz satellite system (about 2-3 miles).Some newer PLBs also allow GPS units to be integrated into the distress signal.This GPS-encoded position dramatically improves the location accuracy down to the 100-meter level…that’s roughly the size of a football field!